Comparative Evaluation of the Efficacy of TheraCal LC, Mineral Trioxide Aggregate, and Biodentine As Direct Pulp Capping Materials in Patients With Pulpal Exposure in Posterior Teeth: A Triple-Blinded Randomized Parallel Group Clinical Trial.

Background The aim was to evaluate and compare the efficacy of TheraCal LC, mineral trioxide aggregate (MTA), and Biodentine as direct pulp capping (DPC) materials in patients with pulpal exposure in the posterior teeth. Methodology A total of 54 samples were assessed for eligibility. Out of this, 12 teeth samples failed to meet the inclusion criteria. Finally, 42 teeth samples were selected which were randomly distributed into three groups (n = 14). Groups A, B, and C received the intervention of MTA, Biodentine, and TheraCal LC, respectively. The assessment was performed clinically to check for postoperative pain, tenderness, and neural sensibility, and the radiographs were used to check the presence of periodontal ligament (PDL) space widening, calcified barrier, and periapical radiolucency at the follow-up of 21 days, three months, and 12 months. The outcomes depended on the clinical and radiographic success rates recorded at 12 months of recall. Results Overall successful outcome of DPC clinically at different periods was 97.61% at three months and 88.09% at 12 months. A Chi-square test was used which showed that the difference was statistically nonsignificant. For groups A, B, and C, the success rate at follow-up came out to be 85.71%, 100%, and 78.57% at 12 months, respectively. The overall radiographic success rate of DPC at different time periods was 83.33% at three months and 88.09% at 12 months. A Chi-square test was used which showed that the difference was statistically nonsignificant. For groups A, B, and C, the success rate at follow-up came out to be 85.71%, 100%, and 78.57% at 12 months, respectively. Conclusion Resin-based calcium-silicate agent (TheraCal LC) showed good efficacy and can be used in practice with the predictability of a good success rate both clinically and radiographically. Thus, TheraCal LC can be utilized as an alternative to MTA or Biodentine in clinical practice, with the predictability of similar successful outcomes in patients with pulpal exposure in the posterior teeth.

Investigating the Effect of Selenium Nanoparticles on Mineral Trioxide Aggregates as a Promising Novel Dental Material.

Aim: To enhance mineral trioxide aggregate high plasticity (MTA HP), a commonly used dental calcium silicate cement, by incorporating selenium nanoparticles (SeNPs) known for their antioxidant and anti-inflammatory properties. The objectives included investigating the impact of SeNPs on the setting time and chemical properties of MTA HP. Materials and Methods: We performed a comprehensive study to formulate and profile SeNPs integrated into MTA HP. Diverse concentrations of SeNPs were introduced into MTA HP, and the commencement and culmination of the setting process were gauged employing a Gillmore needle cabinet. The chemical composition was validated using Fourier transform infrared spectroscopy with attenuated total reflectance and X-ray diffraction analysis. Results: The incorporation of SeNPs led to remarkable improvements. Notably, SeNPs positively affected the setting time of MTA HP, with faster setting times corresponding to higher SeNPs concentrations. Chemical analyses confirmed the successful integration of SeNPs with MTA HP. These enhancements make the material may be suitable for dental applications, especially due to its accelerated setting time. Conclusions: MTA HP incorporated with SeNPs represents a significant advancement in dental materials. Its faster setting time, combined with the antioxidant and anti-inflammatory properties of selenium, provides dental professionals with an efficient and time-saving option for complex treatments. This novel nanomaterial holds promise for improving dental procedures and patient outcomes.

The Successful Interdisciplinary Outcome of Blunderbuss Canal with an Open Apex Using MTA under Magnification: A Case Report.

Aim and objective: The present case report aims to describe the nonsurgical management of an anterior tooth with a blunderbuss canal and an open apex using mineral trioxide aggregate (MTA) under magnification. Background: When pulp is traumatized before root formation, it results in pulpal necrosis, due to which dentin and root formation are interrupted. As a result, the canal remains broad due to thin and fragile dentin walls leading to the open apex. Therefore, root canal treatment is a big challenge currently. In such cases, we prefer MTA apexification to form the hard tissue apical barrier, which is a foreseeable treatment and has been used as another advanced method than calcium hydroxide (CaOH2) apexification due to its superior properties. Case description: A novel apexification technique was used by the Departments of Pediatric Dentistry and Conservative Dentistry and Endodontics for MTA placement in the central incisor with respect to 11 of a 9-year-old female patient. MTA was used to form an apical barrier using the micro-apical placement (MAP) system under a dental operating microscope (DOM). Following MTA hard set confirmation, obturation with bioceramic sealer and gutta percha with warm vertical condensation was done, followed by post-endodontic composite restoration. Conclusion: This case describes the nonsurgical management of an open apex using MTA, MAP system, magnification, and bioceramics, which aided in the management of this endodontic enigma. How to cite this article: Bhasin P, Saraf BG, Chauhan S, et al. The Successful Interdisciplinary Outcome of Blunderbuss Canal with an Open Apex Using MTA under Magnification: A Case Report. Int J Clin Pediatr Dent 2024;17(1):97-101.

Comparative Evaluation of Sealing Ability of Different Type of MTA as Root-End Filling Materials Using Dye Penetration Technique - An In Vitro Study.

Introduction: The main goal of the root-end filling material is to create a hermetic seal to protect against microbes and their by-products. Excellent biocompatibility and sealing ability are characteristics of MTA developed by Torabinejad et al. This study aimed to compare the sealing ability of different type MTA as root-end filling material using dye penetration technique. Material and Method: One-twenty (N = 120) extracted human maxillary anterior teeth were decontaminated, cleaned, and decoronated. Endodontic treatment and root-end resection were done. Then root-end cavity was prepared and filled with tested materials (N = 30). A calibrated stereomicroscope was used to evaluate linear measurement. All data were tabulated and statistically analyzed with a level of significance set at P < .05. Result: This order of increasing microleaks was observed: MTA Angelus < MTA Plus < PRO-Root MTA < Control group. There was a statistically significant difference in mean microleakage in MTA Angelus and MTA Plus groups (P = 0.040). MTA Angelus shows the least microleakage among all the bioceramic material groups. Conclusion: Although the sealing ability of MTA Angelus is superior to MTA Plus, PRO-Root MTA. MTA Plus, PRO-Root MTA could be considered an acceptable alternative to MTA Angelus in peri-radicular surgeries.

Comparative Evaluation of the Push-Out Bond Strength of Glass Ionomer Cement, Mineral Trioxide Aggregate, Biodentine, and Endosequence Root Repair Material in Repair of Furcation Perforations: An In Vitro Study.

Introduction: An in vitro comparative analysis was performed to calculate the push-out bond strength of commercially existing root repairing cements like glass ionomer cement (GIC), biodentine, mineral trioxide aggregate (MTA), and endosequence root repair material (RRM) employed in furcation perforation, with or without blood contamination present. Materials and Methods: Eighty molars were selected and subjected to furcal perforations. They were categorized based on the cement used for repair (GIC, MTA, biodentine, and endosequence RRM); furthermore, they were sub-divided into two sub-groups, that is, blood contaminated and non-contaminated. For 24 hours, all the samples were kept in an incubator till the materials were fully set. Then these samples were examined for push-out bond strength measurement. Results: The 24-hour push-out bond strength of was the highest in biodentine and the lowest in glass ionomer cement. The push-out bond strength of endosequence RRM, MTA, and GIC was influenced by blood contamination. Conclusion: The push-out bond strength of biodentine was the highest as compared to endosequence RRM, MTA angelus, and GIC. The push-out bond strength of endosequence RRM and MTA angelus after 24 hours with or without blood contamination showed insignificant differences. Group 1A (GIC contaminated with blood) displayed the least push-out bond strength among other groups.

Discoloration after revascularization using calcium phosphosilicate-based bioceramic versus mineral trioxide aggregate in necrotic immature permanent anterior teeth: A Randomized clinical trial.

Aim: The aim of the current study is to evaluate the effect of calcium phophosilicate-based bioceramic "Totalfill bioceramic putty" and white mineral trioxide aggregate (WMTA) as the coronal plug on discoloration after revascularization of necrotic immature permanent anterior teeth. Materials and Methods: This study was conducted on (48) necrotic young permanent central incisors in children ranging from 8 to 14 years old, that were randomly allocated to either Totalfill bioceramic (Group I = 24) or WMTA (Group II = 24) as the coronal plug. Two visits revascularization protocol was adopted in this study using 1.5% sodium hypochlorite, followed by 17% ethylenediaminetetraacetic acid, and ending with a saline flush as irrigation solution. The double antibiotic paste was used as intracanal medication. The blood clot was used as scaffold followed by the application of collagen membrane followed by coronal plud malterial. Finally, the access was sealed using resin composite restoration and composite restoration. Clinical assessment was conducted at 1, 3, 6, 9, and 12 months, while radiographic assessment was conducted at 6 and 12 months. Data were statistically analyzed using the Chi-squared test for intergroup comparisons and Cochran's Q test for intragroup comparison. Results: Clinically, Group I exhibited a success rate of 100%, whereas Group II exhibited a success rate of 85.7%. Radiographically, both materials showed a 90.5% success rate. There was no statistically significant difference between both materials for all assessed clinical and radiographic parameters at different follow-up periods. Conclusions: Both Totalfill bioceramic putty and WMTA can be used successfully as coronal plug in esthetic areas.

Comparative Evaluation of Push-Out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, a Modified Mineral Trioxide Aggregate, and Two Novel Antibacterial-Enhanced Mineral Trioxide Aggregates.

Background The challenges associated with incorporating antimicrobial agents, such as the potential diminishment of the cement's physical properties, highlight the need for comprehensive evaluations. Balancing antimicrobial efficacy with the maintenance of structural integrity is a crucial aspect of material development. The acknowledgment of cytotoxic properties associated with tricalcium aluminate, a major constituent in conventional mineral trioxide aggregate (MTA), is critical in terms of long-term evaluation of treatment procedures. The primary focus of the push-out test is to evaluate the resistance of the tested material to dislodgement. Greater push-out strength implies stronger adhesion between the tested material and the tooth surface. Aim This study aims to evaluate the push-out bond strength of two antibacterial-enhanced MTAs with conventional MTA and Biodentine. Material and methods A total of five materials were tested: a) modified MTA, b) doxycycline-enhanced MTA, c) metronidazole-enhanced MTA, d) conventional MTA, and e) Biodentine. All the materials were mixed based on a predetermined powder:liquid ratio and then carried using a plastic instrument to the desired experimental design. Single-rooted permanent teeth, preferably incisors, were used in the present study. Teeth were embedded vertically in a rubber mold, and sectioning of the tooth was performed. A single operator instrumented the canal space in each slice using Gates-Glidden burs, and the mixed cements were placed in the respective groups and stored for 72 hours. A push-out test was carried out using a universal testing machine. Following the bond failure, the slices were examined under a stereomicroscope to determine the nature of the bond failure. The collected data was subjected to a one-way analysis of variance test, post hoc test, and chi-square test for statistical analysis. Results The mean push-out bond strength was found to be the highest for Biodentine (43.25 ± 0.62 megapascals (MPa)), followed by doxycycline- and metronidazole-enhanced MTAs (39.54 ± 0.65 MPa and 39.29 ± 0.16 MPa, respectively), modified MTA formulation (37.75 ± 0.73 MPa), and the lowest for conventional MTA (25.93 ± 0.7 MPa). Conventional MTA samples had an adhesive failure (89.4%), while Biodentine samples had a cohesive failure (80.3%). Mixed failures were noticed with the samples containing modified MTA formulation (71.3%), doxycycline-enhanced MTA (76.6%), and metronidazole-enhanced MTA (78.0%). Conclusion Despite not surpassing Biodentine in bond strength, antibacterial-enhanced MTAs are considered potential alternatives to conventional MTA in day-to-day clinical practice.

Cell Biological and Antibacterial Evaluation of a New Approach to Zirconia Implant Surfaces Modified with MTA.

Peri-implantitis continues to be one of the major reasons for implant failure. We propose a new approach to the incorporation of MTA into zirconia implant surfaces with Nd:YAG laser and investigate the biological and the microbiological responses of peri-implant cells. Discs of zirconia stabilized with yttria and titanium were produced according to the following four study groups: Nd:YAG laser-textured zirconia coated with MTA (Zr MTA), Nd:YAG laser-textured zirconia (Zr textured), polished zirconia discs, and polished titanium discs (Zr and Ti). Surface roughness was evaluated by contact profilometry. Human osteoblasts (hFOB), gingival fibroblasts (HGF hTERT) and S. oralis were cultured on discs. Cell adhesion and morphology, cell differentiation markers and bacterial growth were evaluated. Zr textured roughness was significantly higher than all other groups. SEM images reveal cellular adhesion at 1 day in all samples in both cell lines. Osteoblasts viability was lower in the Zr MTA group, unlike fibroblasts viability, which was shown to be higher in the Zr MTA group compared with the Zr textured group at 3 and 7 days. Osteocalcin and IL-8 secretion by osteoblasts were higher in Zr MTA. The Zr textured group showed higher IL-8 values released by fibroblasts. No differences in S. oralis CFUs were observed between groups. The present study suggests that zirconia implant surfaces coated with MTA induced fibroblast proliferation and osteoblast differentiation; however, they did not present antibacterial properties.

Prognostic Factors Affecting the Outcome of Surgical Root Canal Treatment-A Retrospective Cone-Beam Computed Tomography Cohort Study.

Aim: To assess the association between demographic and clinical variables and the outcome of root-end surgery using digital periapical radiographs (PA) and cone-beam computed tomography (CBCT). Methodology: One hundred and fifty teeth that received endodontic microsurgery were clinically and radiographically examined (PA and CBCT scans) after 1 and 2 years. Two calibrated endodontists evaluated the radiographic healing based on a six-point outcome classification. The outcome was classified using both strict (healed) and loose (healing) criteria. The success rates were calculated, and several outcome prognostic factors were assessed. Results: One hundred and fifty teeth were assessed with both radiographic systems. When "loose" success criteria were applied using PA, 90% (n = 135) of teeth were assessed as having had a favourable outcome (90%; 95% CI: 85.2-94.8%), whereas 90.7% (n = 136) of teeth showed a successful outcome when assessed with CBCT (90.7%; 95% CI: 86.0-95.3%). When "strict" success criteria were applied, there was a statistically significant difference (p = 0.018) between the success rates of mineral trioxide aggregate (MTA) (63.7%) and Biodentine (95.5%). Conclusions: Within the limitations of this study, endodontic microsurgery showed a high success rate. Among all the demographic and clinical variables assessed, in the multiregression analysis, only the use of Biodentine was associated with a higher proportion of "complete" healings compared to MTA or Intermediate Restorative Material (IRM) when assessed using CBCT. MTA and Biodentine performed similarly when "incomplete" healings were regarded as successful outcomes.

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies.

BACKGROUND: Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG). METHODS: The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software. RESULTS: From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength. CONCLUSION: Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect. TRIAL REGISTRATION: PROSPERO registration number: CRD42021253707.

Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates.

AIM: To evaluate the push-out bond strength of two newly modified mineral trioxide aggregates (MTAs) with conventional MTA and biodentine. MATERIALS AND METHODS: Material preparation: Two commercially available bioactive bioceramics: Group I: Mineral trioxide aggregate; Group II: Biodentine; and two newly formulated modified MTAs: Group III: Doxycycline incorporated MTA formulation; Group IV: Metronidazole incorporated MTA formulation was used in the present study. All the test materials were then carried using a plastic instrument to the desired experimental design. Teeth sample preparation: A total of 120 teeth samples were collected and divided into four groups of test materials with 30 teeth samples per group. Single-rooted permanent teeth, that is, incisors were collected and stored in saline until the study was performed. Sectioning of the teeth into 2.0 ± 0.05-mm thick slices was performed perpendicular to the long axis of the tooth. The canal space was instrumented using Gates Glidden burs to achieve a diameter of 1.5 mm. All four prepared materials were mixed and placed in the lumen of the slices and placed in an incubator at 37°C for 72 hours. Push-out test and bond failure pattern evaluation: The push-out test was performed using a universal testing machine. The slices were examined under a scanning electron microscope (SEM) at 40× magnification to determine the nature of bond failure. All the collected data were recorded and statistically analyzed. RESULTS: The mean push-out bond strength was found to be the highest for group II (37.38 ± 1.94 MPa) followed by group III (28.04 ± 2.22 MPa) and group IV (27.83 ± 1.34 MPa). The lowest mean push-out bond strength was noticed with group I (22.89 ± 2.49 MPa). This difference was found to be statistically significant (p = 0.000). Group I samples had the predominantly adhesive type of failure (86.4%), while group II samples showed the cohesive type of failure (94.2%). Both the modified MTAs (groups III and IV) primarily showed mixed types of failures. CONCLUSION: Both the antibacterial-enhanced MTAs had better pushout bond strength compared to conventional MTA but did not outperform biodentine. Hence, it could serve as a substitute for conventional MTA due to its augmented physical properties. CLINICAL SIGNIFICANCE: Carious pulp exposure and nonvital open apices pose a critical challenge to pediatric dental practitioners. In such circumstances, maintaining the vitality of pulp and faster healing would help in a better prognosis. Novel MTAs without any cytotoxic components, and enhanced antibacterial contents with augmented physical properties can help in treating such clinical conditions. How to cite this article: Merlin ARS, Ravindran V, Jeevanandan G, et al. Comparative Evaluation of Push-out Bond Strength of Conventional Mineral Trioxide Aggregate, Biodentine, and Two Novel Antibacterial-enhanced Mineral Trioxide Aggregates. J Contemp Dent Pract 2024;25(2):168-173.

Efficacy of Mineral Trioxide Aggregate (MTA) as a Reparative Material in Iatrogenic Furcal Perforations in Mandibular Molars.

BACKGROUND/OBJECTIVES:  Mineral trioxide aggregate (MTA) is widely recognized as one of the most biocompatible materials for perforation repairs during root canal treatment (RCT). Experimental evidence has consistently demonstrated MTA's superior sealing ability and biocompatibility compared to various dental materials, including amalgam, intermediate restorative material, zinc oxide eugenol cement, and resin-modified glass ionomer cement. This study aimed to assess the efficacy of MTA as a reparative material in iatrogenic furcal perforations during RCT. MATERIALS & METHODS: A descriptive cross-sectional study was conducted from May 18, 2021, to November 17, 2021, at the Department of Operative Dentistry, Nishtar Institute of Dentistry, Multan, Pakistan. Seventy-six patients aged 18-60 years, of both genders, who developed iatrogenic furcal perforations during procedures were included. Patients with fractures or endo-perio lesions identified during clinical and radiographic examinations were excluded. Isolation was achieved using a rubber dam. The perforation site was cleaned and irrigated with 1% sodium hypochlorite to control hemorrhage and enhance visualization. Following the manufacturer's recommendations, the perforation site was sealed with MTA mixed with sterile saline. RESULTS: The age range in this study was 18 to 60 years, with a mean age of 42.09 ± 9.69 years. Most patients (56.78%) were between 41-60 years old. Out of the 76 patients, 46 (60.53%) were male, and 30 (39.47%) were female, resulting in a male-to-female ratio of 1.5:1. The study found that MTA's efficacy as a reparative material in iatrogenic furcal perforations was observed in 61 (80.26%) patients. A 6-month follow-up revealed no periodontal ligament breakdown, demonstrating the efficacy of MTA as a reparative material in iatrogenic furcal perforations. CONCLUSION: This study concludes that the efficacy of MTA as a reparative material in iatrogenic furcal perforations is remarkable and significant.

Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study.

BACKGROUND: This animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA). METHODS: This in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6-8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4-6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent. RESULTS: The data were analyzed using the Kruskal‒Wallis, Fisher's exact, Spearman's, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320). CONCLUSION: MCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

Application of mineral trioxide aggregate pulpotomy in the treatment of early pulpitis of primary molars.

OBJECTIVE: To evaluate the effectiveness of mineral trioxide aggregate (MTA) on pulpotomy in primary molars. METHODS: Two hundred and sixty-three cases (310 teeth) of children with early pulpitis of primary molars admitted between February 2019 to February 2022 were enrolled, and their clinical data were retrospectively analyzed. Of them, 130 cases with 155 teeth treated with root canal treatment were set as the control group (CG) and 133 cases with 155 teeth receiving MTA pulpotomy were set as the observation group (OG). Clinical data such as efficacy evaluation, inflammatory factor levels, postoperative adverse reactions, and quality of life (QoL) were compared. RESULTS: After surgery, the overall response rate in the OG was statistically higher than that in the CG, while the levels of inflammatory factors in the OG were significantly lower than those in the CG (all P<0.05). Moreover, the total incidence of complications was significantly lower in OG at 3, 6, and 12 months after surgery (P=0.018, P=0.007, P=0.015, respectively). The QoL of the two groups differed insignificantly before surgery; however, after the treatment, the QoL in OG was significantly higher than those in the CG at 3, 6, and 12 months after surgery (P=0.037, P=0.012, P=0.028, respectively). Moreover, the teeth location and treatment method were independent factors of efficacy (P=0.047, P=0.001, respectively). CONCLUSIONS: MTA pulpotomy outperformed root canal treatment for superior efficacy in children with early pulpitis of primary molars, with a positive effect on improving QoL, and patient prognosis.

Vital root resection with radicular retrograde partial pulpotomy in furcation-involved maxillary molars in patients with periodontitis: Technique description and case series considering clinical and economic aspects.

AIM: Conventional root resection in periodontally compromised furcation-involved maxillary molars requires preceding endodontic treatment and is therefore associated with loss of tooth vitality, higher invasiveness, treatment time and costs, and the risk of endodontic complications. Vital root resection (VRR) could overcome these disadvantages while establishing stable periodontal and endodontic conditions. This case series aimed to introduce the concept of one-stage VRR with radicular retrograde partial pulpotomy (VRRretro). SUMMARY: Seven vital maxillary molars with residual probing pocket depths (PPD) ≥ 6 mm and furcation ≥ class 2 of five patients with stage III/IV periodontitis were treated with VRRretro using mineral trioxide aggregate. Teeth with residual through-and-through furcations were additionally tunnelled. Follow-up up to 2.5 years postoperatively during supportive periodontal care included full periodontal status, percussion and thermal sensitivity testing. Periapical radiographs were obtained to rule out possible periradicular radiolucencies. All seven treated molars were in-situ at an average of 26.84 ± 5.37 months postoperatively and were clinically and radiographically inconspicuous independent of tooth position, the resected root, the need for tunnelling and the restorative status. The mean PPD on the seven treated molars was 4.02 ± 0.85 mm (6-10 mm) preoperatively and 2.62 ± 0.42 mm (3-4 mm) at the last follow-up. Clinical attachment level and bleeding on probing could also be decreased. The teeth showed no mobility over time and furcations class 2 were reduced to class 1 while the tunnelled furcations were accessible with interdental brushes. All molars reacted negatively to percussion and positively to thermal sensitivity testing. KEY LEARNING POINTS: In carefully selected cases considering patient- and tooth-related factors, VRRretro could be a promising treatment option to establish stable periodontal and endodontic conditions in furcation-involved maxillary molars while preserving tooth vitality.

An animal study on the effectiveness of platelet-rich plasma as a direct pulp capping agent.

Direct pulp capping (DPC) is a conservative approach for preserving tooth vitality without requiring more invasive procedures by enhancing pulp healing and mineralized tissue barrier formation. We investigated the effectiveness of Platelet Rich Plasma (PRP) vs. Mineral Trioxide Aggregate (MTA) as a DPC agent. Forty-two teeth from three mongrel dogs were divided into two equal groups. After three months, the animals were sacrificed to evaluate teeth radiographically using cone-beam computerized tomography, histopathologically, and real-time PCR for dentin sialophosphoprotein (DSPP), matrix extracellular phosphoglycoprotein (MEPE), and nestin (NES) mRNA expression. Radiographically, hard tissue formation was evident in both groups without significant differences (p = 0.440). Histopathologic findings confirmed the dentin bridge formation in both groups; however, such mineralized tissues were homogenous without cellular inclusions in the PRP group, while was osteodentin type in the MTA group. There was no significant difference in dentin bridge thickness between the PRP-capped and MTA-capped teeth (p = 0.732). The PRP group had significantly higher DSPP, MEPE, and NES mRNA gene expression than the MTA group (p < 0.05). In conclusion, PRP enables mineralized tissue formation following DPC similar to MTA, and could generate better cellular dentinogenic responses and restore dentin with homogenous architecture than MTA, making PRP a promising alternative DPC agent.

Pulpotomy for the Management of Irreversible Pulpitis in Mature Teeth.

Strict protocols for evaluating the pulp's preoperative state should be developed, along with a new classification scheme for the different pulp states, as case selection plays a major role in the effectiveness of adult pulpotomy. In this case report, a male patient, age 15, who had a carious lower left first molar underwent pulpotomy. The pulp's initial state was ascertained by pulse oximetry, electric pulp testing (EPT), and cold testing. The final diagnosis was symptomatic irreversible pulpitis. A 12-month follow-up period following the placement of mineral trioxide aggregate (MTA) (MTA Angelus Angelus, Londrina, Brazil; Clinician's Choice, New Milford, CT) and tooth-colored composite restoration revealed no visible anomalies in the postoperative radiographs, and the tooth remained functional and free of symptoms.

Partial pulpotomy success in primary molars followed up for 24 months: A randomized controlled clinical trial using mineral trioxide aggregate, biodentine, and acemannan.

BACKGROUND: Finding the best treatment approach and suitable capping materials in primary molars with deep carious lesions remains unresolved. AIM: To compare the success rates of partial pulpotomy in deep caries lesions in primary molars treated with mineral trioxide aggregate (MTA), biodentine, or acemannan for 6-24 months. DESIGN: A parallel-design, non-inferiority randomized controlled clinical trial was performed. Ninety mandibular primary molars from 65 children meeting the criteria, aged 3-8 years, were included. After inflamed pulp tissue removal and hemostasis, each tooth was randomly allocated into the MTA control group, or the biodentine or acemannan experimental group (N = 30 per group). All teeth were restored with a stainless steel crown. The outcomes were evaluated for 6-24 months. A generalized estimating equation model was used to compare the overall success rate in each group. RESULTS: After 24 months, 58 children (83 teeth) were available for evaluation. The results indicated that the success rate in the MTA, biodentine, and acemannan groups was 83.3%, 76.9%, and 74.1%, respectively. No significant difference in success rates among groups, however, was observed at the 6- to 24-month follow-ups (at 24th month, p = .30). CONCLUSION: There was no statistically significant difference between MTA, biodentine, or acemannan in the partial pulpotomy success after 24 months.

Healing and Spontaneous Realignment of Displaced Roots With Periapical Granuloma After Microsurgical Endodontic Treatment (Three Years' Follow-up): A Case Report.

Endodontic therapy aims to treat or prevent apical periodontitis, a condition characterized by inflammation of the periapical tissues at the apex of the tooth root. This case study demonstrates the successful nonsurgical and surgical management of a large periapical lesion involving the lower central incisors with root displacement induced by a periapical granuloma. A patient was referred from the maxillofacial department for endodontic treatment due to persistent pain and swelling in the lower anterior region started two months ago. Upon arrival, a clinical examination and radiographic assessment were performed using cone-beam computed tomography (CBCT). The CBCT scan revealed a significant radiolucent area measuring (10x8) mm extending from the lower left lateral incisor to the right central incisor. The lower left central incisor was necrotic and tender to palpation and percussion. A nonsurgical root canal was performed followed by an apicectomy using mineral trioxide aggregate (MTA) to facilitate healing of the periapical lesion. Histopathological examination of the lesion confirmed the diagnosis of periapical granuloma. At follow-up 1, 2, and 3 years' visits, the periodontal assessment was performed and found to be free of pain upon percussion or palpation. No other clinical or radiological signs or symptoms were identified except for a small radiolucent area mesially adjacent to the root of the lower left central incisor. The development of materials such as MTA has significantly improved the prognosis of cases with large periapical lesions. In this case, healing and spontaneous realignment of the root were observed after three years.

Biodentine as a pulpotomy medicament for primary molars: a retrospective chart review.

This retrospective chart review study investigates the long-term clinical outcome of Biodentine® (Tricalcium silicate) as a medicament for pulpotomy in primary molars. Data in this retrospective study was collected from the dental records of all patients that had at least one primary molar receive pulpotomy treatment (CDT code: D3221) between 01 July 2012 and 01 July 2015. This data includes child's age, medical history, dental history, dental radiographs, pulpotomy procedure details and follow-up clinical notes. Kaplan-Meier Estimate was used to measure the fraction of successful pulpotomy procedures for up to 24 months. A total of 1758 pulpotomy procedures were performed on 1032 patients in our institute in the three-year period and 21.4% of them (N = 376) had follow-up dental records that qualified for the study. Eleven teeth out of 376 teeth were excluded from the statistical analysis due to loss of/broken stainless steel crowns (3.1%). Seventeen pulpotomy failures were identified out of the remaining 365 procedures. The survival probablity of using Biodentine® as a pulpotomy medicament is 96.3% for 18-month follow-up and 95.4% for 24-month follow-up. Biodentine®, a tricalcium silicate formulation, used as a pulpotomy medicament demonstrates a high clinical success rate (95.4%) over a 24-month peroid in primary molars.